CAT - 3/8" reveal
CAT - 7/16" reveal
|CAT CARPET TRIM|
|Tile Thickness||Product Code|
|1/4" - 6mm||CTC 14 CAT|
|11/32" - 8mm||CTC 1132 CAT|
|7/16" - 10mm||CTC 716 CAT (formerly DB)|
CAT - Anodized Aluminum Carpet Trim
CTC Trims and Transitions can easily be modified and installed in a radius or curve using the following directions as a guide.
Using a tin snips or other appropriate tool, cut the notches out of perforations in leg. The number of open holes required is dependent on the size of the radius. The more perforations that are cut the more bendable the product becomes. (If bending the CTC Joint, you will need to cut the leg on both sides.)
Then slowly bend the CTC Trim into the desired arc. CTC Transitions can be shaped for inside or outside radiuses.
We strongly suggest the use of a template to pre-shape transitions strips prior to installation. This will prevent "kinking" of materials. A template can be created out of any sturdy sheet material such as plywood or masonite.
TILE TO CARPET TRANSITIONS
Provide anodized aluminum strip with reveal at top edge, for carpet protection and integral provision for anchorage to mortar bed or substrate. To be installed with leg under hard surface flooring where the carpet and hard surface meet. Height to match, tile, stone or wood thickness. Reveal width and finish to be determined by architect.
Manufacturer - Ceramic Tool Company
Ceramic Tool Company (CTC) warrants our products to be of good quality and manufactured to meet ANSI standards.
Satisfactory results depend not only upon the quality of our products but also on many factors beyond our control.
The user shall rely on his own information and tests to determine suitability of the product for the intended use and the user assumes all risk and liability resulting from his use of this product.
CTC's sole liability is to replace the product or refund the purchase price if the product is determined to be defective.
All CTC trims are made in the USA.
Here at Ceramic Tool Company, it is our responsibility to provide all our customers with the best flooring products at a great price. More than that, we know beyond our inventory we have the experience of 30 years helping you get the exact material you need, exactly when you need it.
When you call Ceramic Tool, our goal is to understand just what your application is, so even if the plans don't call out for our product, we make sure the right one gets installed. We want to find the best way to help you, from finding the perfect flooring trim to getting it shipped to you or the jobsite right on time.