Phone: 1-800-236-5230    |    Email: ctc@ceramictool.com

JOINT                   CARPET TRIM                   BACKWARD                   CARPET TRIM                   BAR                   TRANZ                   RAMP                   WHAT IS ANODIZING?                   PRODUCT WARRANTY                   PRODUCT SPECS

CTC Edge CTC Edge offers protection against chipping of tile edges at transitions. It is an economical alternative to bull nose tile. It is available is Brass, Bronze or Clear anodized finishes.

May be used in place of bullnose tile Vertical and horizontal applications are suitable for CTC Edge installation High traffic commercial floor applications are most common May be used as a decorative strip between tiles

This product is engineered to protect tile, stone or wood against damage from impact The edge is designed with a slight angle toward the tile to distribute the impact through the body of the tile, thus protecting the tile edge from damage

Aluminum: clear, bronze, black and brass anodized finishes

CTC Trims and Transitions can easily be modified and installed in a radius or curve using the following directions as a guide. Using a tin snips or other appropriate tool, cut the notches out of perforations in leg. The number of open holes required is dependent on the size of the radius. The more perforations that are cut the more bendable the product becomes. (If bending the CTC Joint, you will need to cut the leg on both sides) Then slowly bend the CTC Trim into the desired arc. CTC Transitions can be shaped for inside or outside radiuses We strongly suggest the use of a template to pre-shape transitions strips prior to installation. This will prevent "kinking" of materials. A template can be created out of any sturdy sheet material such as plywood or masonite

CTC Edge is available in 8ft. lengths Manufactured in eight (8) heights: 1/4", 11/32", 3/8", 7/16", 1/2", 5/8", 3/4", and 7/8" Reveal is 1/8" wide

Tile Thickness Clear Bronze Brass 1/4" - 6mm CTC 14 CTC 14 Bronze CTC 14 Brass 5/16" - 8mm CTC 1132 CTC 1132 Bronze CTC 1132 Brass 3/8" - 9mm CTC 38 CTC 38 Bronze CTC 38 Brass 7/16" - 10mm CTC 716 CTC 716 Bronze CTC 716 Brass 1/2" - 12mm CTC 12 CTC 12 Bronze CTC 12 Brass 5/8" - 15mm CTC 58 CTC 58 Bronze CTC 58 Brass 3/4" - 20mm CTC 34 CTC 34 Bronze CTC 34 Brass 7/8" - 22mm CTC 78 CTC 78 Bronze CTC 78 Brass

CERAMIC TOOL COMPANY, INC.    |    W237 N2872 Woodgate Road, Pewaukee, WI 53072